HOW TO MAKE WINCONNECT

HOW TO MAKE WINCONNECT
Surely you've heard commercials like this "network course that makes your old Pentium PC Pentium 4 would be equivalent to" definitely a lot to think "how come" and must be wondering how to get well, and you definitely want to find out. ads like this very much at all nampang in newspapers or magazines advertised information technology by the NFE as a course in the capital. Such advertisements are true so long Pentium Pentium 4 is a network with a server and use the emulator program that has been well-known today, such as Citrix Metaframe XP or Windows Terminal Service belongs windows 2000/2003 server.

1. PC Cloning Is it?
PC is a technology Terminal Service on local computer networks that use the cable as a Local Area Network (LAN) and wireless networks such as Wide Area Network (WAN). Cloning System has the ability to empower a computer type as fast as the latest computer used as server software or facilities only with Terminal Services in Windows NT 4.0 or Windows 2000 Server. And of course the software that will be discussed this time is "WINCONNECT"
The way it works is a kind of software will make the process of cloning the configuration server (CPU and RAM) and then make it easy to virtually all computer (workstation) connected to the server.

2. Benefits of PC Cloning
Efficient, because you only need one unit of high-speed computers to be used as Sender While PC Client can use the computer as long as the old 486 or Pentium PC.
Efficiency, Installation of all applications is only done at the server. Computer Client only need a system with a hardware device with lower specs.
Even the client computer can work without a hard disk, just the disk (of course with the modification).

3. To Whom PC Cloning?

This system can be used by all people who have more than one computer unit such as:
Government offices and private
Educational institutions such as schools. college or institute courses.
Non-governmental organizations (NGOs).
Etc.

4. Hardware Required

4.1. Computer Server

Computer servers will be the center of the network becomes the source for Cloning process. Computer Server only one unit with sufficient capacity so that it can serve all clients on the network.

In order subsystem performance Cloning maximum run, note Computer Server hardware configuration as follows:
CPUs based on Pentium III / IV
Memory at least 256 MB (bigger)
Minimum hard drive, 4.3 GB
Floppy Disk Drive (FDD)
CD Rom Drive
Sound Card
Ethernet Card (LAN Card) 10 or 10/100 Mbps
Keyboard & Mouse
VGA SVGA Monitor
Modem (if needed for internet connection)

4.2. Client Computer

Client computer is a computer which is used as a workstation, the numbers are adjusted to the needs. There is no limit to the number of clients, but if there are more than ten computers, you should increase the ability of server resources, especially memory.

Client computer specs are as follows:
CPU-based 286, 386, 486 or higher
At least 2 MB of memory or higher
8 MB if using Windows 95 (CPU 486)
16 MB if using Windows 98 (CPU Pentium 100)
± 100 MB hard drive for system DOS / Windows 98
VGA card at least 256 Colour (16 bit recommended above)
Floppy Disk (FDD) 1.44 MB
Sound Card
Ethernet Card (LAN Card) 10 or 10/100 Mbps or Wired LAN
Keyboard
Mouse
Monitor VGA / SVGA

4.3. Local Area Network (LAN)

To connect all the computers to be used in the system needed equipment Cloning LAN (Local Area Network), which consists of Ethernet HUB, LAN Card. UTP Cables and Connectors RMS.

5. PC Cloning Software Winconnect

Terminal Service facility located on a Windows NT 4.0 Terminal Edition (TSE) and Windows 2000 Server Family (Windows 2000 Server, Windows 2000 Advanced Server and Windows 2000 Datacenter Server). But is not installed by default unless you add the facility at the time of installation or via the Windows Component in Control Panel.

But we are talking about today is the Terminal Services of the software WINCONNECT. Winconnect (Download at www.thinsoftinc.com) is a terminal emulator software that is used to enable the Linux Base Windows terminal or base station (Win95/98, Win XP, Win 2000, etc) to be connected to a terminal emulator (WinXP, Windows Server) through a Remote Display Protocol (RDP) or Remote Desktop Web Connection.

Why it was done because in order to save resources and dollars of course. By simply utilizing the Windows server so that users can capitalize on all the resources in real time owned windows server, the operating system such as Linux or Windows OS platform variety and even PDAs. To be able to make a Pentium 486 or personal digital assistant (PDA) can be used (Local Area Network) Via LAN or Internet. Etc. This is so the user / client just as the input-output Keyboard and Mouse which all the process is done on the server.

A high speed internet broadband connection such as DSL or ADSL or ISN which was in your office can be used for your work to your home by relying on low-speed internet access such as dial-up. So you work at home but as if you were in your office, not just in your home in warnetpun you can do with only using Internet Explorer (Note: by IP Forwarding rent first or Public IP, will be discussed next time) to utilize all resource kompurter your office. Asik is not ....?

NETWORK INSTALLATION LAN (LOCAL AREA NETWORK)

For now discussed using a LAN network connection. And the principle is the same when applied to systems other connections.

1. Ethernet HUB or Concentrator

HUB is a device that has a lot of holes (Port), which will connect all the computers. One port will connect to the HUB Computer Server. While other ports are used to connect the Client Computer or Workstation that already have a LAN Card to form a network.

Ports available to 8, 16, 24 or more according to your needs. For speed, you can use the HUB 10 or 10/100. We recommend using 10/100 as it can be used for a maximum speed network 10/100.

2. Ethernet Card

Ethernet card or LAN card is often referred to as NIC (Network Interface Card) form of electronic boards installed in each computer to be connected to the network, you used to use a type of LAN Card ISA or PCI with a speed of 10 or 10/100 Mbps. Surely must be tailored to the type of Ethernet HUB will be used.

3. LAN UTP Cable

There are several types of cables for the network, but for the more easily you can use the cable type of UTP (Unshelded Twisted Pair), since in addition to its ability not too expensive, too unreliable.

4. UTP connectors (Jack RJ-45)

UTP cable is required to connect the RJ-45 jack or something that looks similar to a phone jack cable cord yet more holes. Connectors installed at both ends of the cable with special equipment Tang UTP. But if you can not install it, you can ask at the time of purchase as well as installation of UTP cable.

Winconnect is very similar to the Citrix Metaframe client that allows the ability to be the same as the server capacity, but the advantages of this program compared to the Citrix Metaframe XP is able to run on Windows XP Home or Professional version as the server, which if Citrix can only run on Windows 2000 server installation was that for the first time is quite complicated especially if you are also able to activate the headache that accompanied system of licenses for each client / user (is not this a waste of our country in an era of continuous slumped).

With this program you installed fairly easily once. So the ability of a PC running Windows XP or Win Server will be run on Windows 95/98, Win Me, Win2000 and Win XP and even Linux Mandrake Linux RedHat and various other Linux platforms, bahakan PDA can also, simultaneously and stand alone like server.

So the ability Winconnect like mencloning entire server capabilities including all its programs without exception including the all PC resources such as CD ROMs, Internet conection, Hard Drive, Printer and so basically all of them, but each side of the stand-alone client or walk on their own. Proverbial computer server side dijalakan removed and each user but run itself by the same user / realtime.

Some of the advantages Terminal Connect this:

- Runs on Windows XP (Home or Professional versions) without using Operation System such as Windows Server 2000 Server.

- Mengcloning entire server capabilities and all its software to run on the client at no cost to the client at all (so the client only as input and outputs a keyboard and mouse, and display monitor). Suppose you have a Pentium I Pentium 4 others whose ability to run programs such as 3-D Studio Max or 3-D virtual reality where not able to run the client with the ability to Old PC as a low-Operation System (Win95, Win98, WinMe, Win2000), with the program client was able to run the program with the entire process is done in the Pentium 4.

- If the client runs on Windows XP simply use the existing Remote Display Protocol on Windows XP if you install in Windows 98/Me enough RDP windows XP.

- Client running on linux can run a Pentium 4 PC capabilities running on Windows XP. So, with this program you do not need any PC in the office you have to run Windows XP that requires a license must be purchased much less era IPR application today, so servers are using Windows XP others such as Linux. So Linux is also capable of running Windows XP and Linux installed every PC will run Windows XP simultaneously and operate independently to harness the full capabilities of Windows XP and its hardware without exception (except VGA). System is very nice manner applied in the cafe-cafe ........ saving dollars of course, without violating Microsoft licenses. For example, customers in the cafe sector in all there are 20 pc pc in instalkan Linux only (PC ...? Buying a second / cheap home was able to run the Linux). While on the server is to use one Windows XP licenses. And all your Linux PC be able to run Windows XP. Then if there is a hardware upgrade must be more efficient because the server that will be upgraded save right??.

- You can also work at home to take advantage of the ability of Windows XP in your office via the internet, which does not burden the ability of PCs in your home. For example in your home dial-up internet access with slow internet access and internet access in your office is very high speed, with the program will also take advantage of internet access which is also owned by the same fast Windows XP in your office, because all the processes performed in the server in your office while your home PC Display and communication displays only keyboard and mouse. (Not fun ......?).

- Installation is easy as when you install a program such as MS Office, Adobe, Corel. Unlike Citrix should run on Win2000 Server and the installation must need flair.

- The file size is very small compared with Cuma citrix 8.5 MB in size up to 300 MB.

- With this program Pentium 4 server capabilities will be utilized for a number of user / client freely. Compared with windows teriminal service owned windows 2000 must obtain licenses for each clientnya.

- Resolution to adjust the resolution of our client, can choose what we want pixel resolution as 460 x 480 or 800 x 600 or 1024 x 768 or more than it can afford and can monitor client in full screen mode which is as though our old Pentium PC 'm running windows XP.

- Good use for a cafe, offices can save if will upgrade hardware. Because not need to be complicated-complicated just replace aja server. And very efficient because the entire program will be available in the server wrote, so no need to install on the client. And in fact if you're observant you also can use a PC client diskless booting Thin Offiz using software or any other etc on Windows XP Server



6. For the client side

If Windows XP / Windows 2000 as a client in order to run a program that has been used built-in Windows XP on it.

Follow the steps below:


Click on the start menu
Select Programs
Select Accessories, click Communications, and then click "Remote Desktop Connection" will appear like the picture below:
To run this program in the general option on the option Computer Click the down arrow select the word "" is used to locate the terminal server is active, it will show a box containing a computer that has a terminal server.
Double-click the PC contained the Terminal Server and Windows XP will go into raising a log-on dialog box as shown below

If Client Windows 95/98/Me
If the program to run Remote Desktop Connection in Windows 95/98/Me Should we do the installation because Windows 95/98/Me program is not built-in in it, so it must first install the RDP for Windows 95/98/Me. As for the run all the same programs as a step to run on Windows XP/2000.